Skip to content

adp7@petro-green.com | 972.484.7336

Petro-Green, Inc.

ADP-7 Safety Data Sheet
ADP-7 Product Data Sheet

Contact Us

Thank you for your response. ✨

Name(required)

Warning

Email(required)

Warning

Website

Warning

Comment(required)

Warning

Warning.

Δ

P.O. Box 814665
Dallas, TX 75381
Phone/Fax: (972) 484-7336
Email: adp7@petro-green.com

Share this:

Print
Email
More

Facebook
X
LinkedIn
Pinterest
Pocket

Like Loading...

ADP-7 Surface Washing Agent

ADP-7 is a water-soluble, non-ionic/anionic surfactant blend designed for wetting a wide variety of soils and washing a wide variety of crude oils. This “lift and disperse” surface washing agent makes it easier to remove oil from surfaces and structures that have been oiled so that they don’t become secondary sources of pollution. Treated oil is broken into small droplets that are encapsulated by the ADP-7 solution.

ADP-7 will immediately begin to soften and lift oil off of surfaces that have been oiled, such as beach rocks, rock platforms, artificial structures and riprap. On soil or rocky surfaces, where oil is trapped in areas inaccessible to physical removal, this material will quickly and efficiently move oil to the topmost layers of the surface where it can then be removed. The location’s appearance and odor from the spill is quickly brought back to its original state with no scraping or replacing of soil. If treating oil adjacent to regulator water, the use of ADP-7 must first be authorized by the On-Scene Coordinator.

ADP-7 is a concentrated cleaner and should be diluted with water prior to application. Small applications can be made using hand-held units such as Hudson sprayers. Large applications use eduction systems coupled with fire hoses, power washers and other similar methods. Allow time for product to work once applied. Agitation (scrubbing) will also improve results. Flush area with water or a high pressure wash. The use of heated water in both the spray and the flush may improve results when encountering very sticky oils.

Dilutions will vary depending on the severity of the situation. For spills on land typical dilution is 1 gallon of ADP-7 with 42 gallons of water (approximately 2.4% concentration). Higher water temperatures (over 78ºF) and/or good agitation during application will allow you to reduce the concentration strength as well as speed the cleaning operation. Aged or asphaltic spills may be more resistant to removal. Heating the solution to 150ºF in a hot water washing rig or a common oil field “hot oiler” truck will increase effectiveness. After treatment residue should be collected and removed from the site. Collection process should be determined by on-site coordinator based on practices of the area. Residue should be disposed of according to Local, State and Federal regulations. ADP-7 is effective in salt water or fresh water, with no limitations as to usage within optimum temperature parameters.

Website Powered by WordPress.com.

Loading Comments...

Write a Comment...

Email

Name

Website

%d